HomeFrameworksNodeJSHow to Make a Request Using Axios API?

How to Make a Request Using Axios API?

Axios API

This journal is in continuation of the journal where we saw the features and installation of the Axios – Promise based HTTP client. In case you missed out reading that journal then you can find the same here “Axios: Promise based HTTP client for the Browser and NodeJS”.

Requests can be made by passing the relevant config to axios.

axios(config)
// Send a POST request
axios({
  method: 'post',
  url: '/user/12345',
  data: {
    firstName: 'Fred',
    lastName: 'Flintstone'
  }
});
// GET request for remote image
axios({
  method:'get',
  url:'http://bit.ly/2mTM3nY',
  responseType:'stream'
})
  .then(function(response) {
  response.data.pipe(fs.createWriteStream('ada_lovelace.jpg'))
});
axios(url[, config])
// Send a GET request (default method)
axios('/user/12345');

Request method aliases

For convenience aliases have been provided for all supported request methods.

axios.request(config)
axios.get(url[, config])
axios.delete(url[, config])
axios.head(url[, config])
axios.options(url[, config])
axios.post(url[, data[, config]])
axios.put(url[, data[, config]])
axios.patch(url[, data[, config]])
NOTE

When using the alias methods urlmethod, and data properties don’t need to be specified in config.

Concurrency

Helper functions for dealing with concurrent requests.

axios.all(iterable)
axios.spread(callback)

Creating an instance

You can create a new instance of axios with a custom config.

axios.create([config])
var instance = axios.create({
  baseURL: 'https://some-domain.com/api/',
  timeout: 1000,
  headers: {'X-Custom-Header': 'foobar'}
});

Instance methods

The available instance methods are listed below. The specified config will be merged with the instance config.

axios#request(config)
axios#get(url[, config])
axios#delete(url[, config])
axios#head(url[, config])
axios#options(url[, config])
axios#post(url[, data[, config]])
axios#put(url[, data[, config]])
axios#patch(url[, data[, config]])

Request Config

These are the available config options for making requests. Only the url is required. Requests will default to GET if methodis not specified.

{
  // `url` is the server URL that will be used for the request
  url: '/user',

  // `method` is the request method to be used when making the request
  method: 'get', // default

  // `baseURL` will be prepended to `url` unless `url` is absolute.
  // It can be convenient to set `baseURL` for an instance of axios to pass relative URLs
  // to methods of that instance.
  baseURL: 'https://some-domain.com/api/',

  // `transformRequest` allows changes to the request data before it is sent to the server
  // This is only applicable for request methods 'PUT', 'POST', and 'PATCH'
  // The last function in the array must return a string or an instance of Buffer, ArrayBuffer,
  // FormData or Stream
  transformRequest: [function (data) {
    // Do whatever you want to transform the data

    return data;
  }],

  // `transformResponse` allows changes to the response data to be made before
  // it is passed to then/catch
  transformResponse: [function (data) {
    // Do whatever you want to transform the data

    return data;
  }],

  // `headers` are custom headers to be sent
  headers: {'X-Requested-With': 'XMLHttpRequest'},

  // `params` are the URL parameters to be sent with the request
  // Must be a plain object or a URLSearchParams object
  params: {
    ID: 12345
  },

  // `paramsSerializer` is an optional function in charge of serializing `params`
  // (e.g. https://www.npmjs.com/package/qs, http://api.jquery.com/jquery.param/)
  paramsSerializer: function(params) {
    return Qs.stringify(params, {arrayFormat: 'brackets'})
  },

  // `data` is the data to be sent as the request body
  // Only applicable for request methods 'PUT', 'POST', and 'PATCH'
  // When no `transformRequest` is set, must be of one of the following types:
  // - string, plain object, ArrayBuffer, ArrayBufferView, URLSearchParams
  // - Browser only: FormData, File, Blob
  // - Node only: Stream, Buffer
  data: {
    firstName: 'Fred'
  },

  // `timeout` specifies the number of milliseconds before the request times out.
  // If the request takes longer than `timeout`, the request will be aborted.
  timeout: 1000,

  // `withCredentials` indicates whether or not cross-site Access-Control requests
  // should be made using credentials
  withCredentials: false, // default

  // `adapter` allows custom handling of requests which makes testing easier.
  // Return a promise and supply a valid response (see lib/adapters/README.md).
  adapter: function (config) {
    /* ... */
  },

  // `auth` indicates that HTTP Basic auth should be used, and supplies credentials.
  // This will set an `Authorization` header, overwriting any existing
  // `Authorization` custom headers you have set using `headers`.
  auth: {
    username: 'janedoe',
    password: 's00pers3cret'
  },

  // `responseType` indicates the type of data that the server will respond with
  // options are 'arraybuffer', 'blob', 'document', 'json', 'text', 'stream'
  responseType: 'json', // default

  // `xsrfCookieName` is the name of the cookie to use as a value for xsrf token
  xsrfCookieName: 'XSRF-TOKEN', // default

  // `xsrfHeaderName` is the name of the http header that carries the xsrf token value
  xsrfHeaderName: 'X-XSRF-TOKEN', // default

  // `onUploadProgress` allows handling of progress events for uploads
  onUploadProgress: function (progressEvent) {
    // Do whatever you want with the native progress event
  },

  // `onDownloadProgress` allows handling of progress events for downloads
  onDownloadProgress: function (progressEvent) {
    // Do whatever you want with the native progress event
  },

  // `maxContentLength` defines the max size of the http response content allowed
  maxContentLength: 2000,

  // `validateStatus` defines whether to resolve or reject the promise for a given
  // HTTP response status code. If `validateStatus` returns `true` (or is set to `null`
  // or `undefined`), the promise will be resolved; otherwise, the promise will be
  // rejected.
  validateStatus: function (status) {
    return status >= 200 && status < 300; // default
  },

  // `maxRedirects` defines the maximum number of redirects to follow in node.js.
  // If set to 0, no redirects will be followed.
  maxRedirects: 5, // default

  // `httpAgent` and `httpsAgent` define a custom agent to be used when performing http
  // and https requests, respectively, in node.js. This allows options to be added like
  // `keepAlive` that are not enabled by default.
  httpAgent: new http.Agent({ keepAlive: true }),
  httpsAgent: new https.Agent({ keepAlive: true }),

  // 'proxy' defines the hostname and port of the proxy server
  // `auth` indicates that HTTP Basic auth should be used to connect to the proxy, and
  // supplies credentials.
  // This will set an `Proxy-Authorization` header, overwriting any existing
  // `Proxy-Authorization` custom headers you have set using `headers`.
  proxy: {
    host: '127.0.0.1',
    port: 9000,
    auth: {
      username: 'mikeymike',
      password: 'rapunz3l'
    }
  },

  // `cancelToken` specifies a cancel token that can be used to cancel the request
  // (see Cancellation section below for details)
  cancelToken: new CancelToken(function (cancel) {
  })
}

Response Schema

The response for a request contains the following information.

{
  // `data` is the response that was provided by the server
  data: {},

  // `status` is the HTTP status code from the server response
  status: 200,

  // `statusText` is the HTTP status message from the server response
  statusText: 'OK',

  // `headers` the headers that the server responded with
  // All header names are lower cased
  headers: {},

  // `config` is the config that was provided to `axios` for the request
  config: {},

  // `request` is the request that generated this response
  // It is the last ClientRequest instance in node.js (in redirects)
  // and an XMLHttpRequest instance the browser
  request: {}
}

When using then, you will receive the response as follows:

axios.get('/user/12345')
  .then(function(response) {
    console.log(response.data);
    console.log(response.status);
    console.log(response.statusText);
    console.log(response.headers);
    console.log(response.config);
  });

When using catch, or passing a rejection callback as second parameter of then, the response will be available through the error object as explained in the Handling Errors section.

Config Defaults

You can specify config defaults that will be applied to every request.

Global axios defaults

axios.defaults.baseURL = 'https://api.example.com';
axios.defaults.headers.common['Authorization'] = AUTH_TOKEN;
axios.defaults.headers.post['Content-Type'] = 'application/x-www-form-urlencoded';

Custom instance defaults

// Set config defaults when creating the instance
var instance = axios.create({
  baseURL: 'https://api.example.com'
});

// Alter defaults after instance has been created
instance.defaults.headers.common['Authorization'] = AUTH_TOKEN;

Config order of precedence

Config will be merged with an order of precedence. The order is library defaults found in lib/defaults.js, then defaultsproperty of the instance, and finally config argument for the request. The latter will take precedence over the former. Here’s an example.

// Create an instance using the config defaults provided by the library
// At this point the timeout config value is `0` as is the default for the library
var instance = axios.create();

// Override timeout default for the library
// Now all requests will wait 2.5 seconds before timing out
instance.defaults.timeout = 2500;

// Override timeout for this request as it's known to take a long time
instance.get('/longRequest', {
  timeout: 5000
});

Interceptors

You can intercept requests or responses before they are handled by then or catch.

// Add a request interceptor
axios.interceptors.request.use(function (config) {
    // Do something before request is sent
    return config;
  }, function (error) {
    // Do something with request error
    return Promise.reject(error);
  });

// Add a response interceptor
axios.interceptors.response.use(function (response) {
    // Do something with response data
    return response;
  }, function (error) {
    // Do something with response error
    return Promise.reject(error);
  });

If you may need to remove an interceptor later you can.

var myInterceptor = axios.interceptors.request.use(function () {/*...*/});
axios.interceptors.request.eject(myInterceptor);

You can add interceptors to a custom instance of axios.

var instance = axios.create();
instance.interceptors.request.use(function () {/*...*/});

Handling Errors

axios.get('/user/12345')
  .catch(function (error) {
    if (error.response) {
      // The request was made and the server responded with a status code
      // that falls out of the range of 2xx
      console.log(error.response.data);
      console.log(error.response.status);
      console.log(error.response.headers);
    } else if (error.request) {
      // The request was made but no response was received
      // `error.request` is an instance of XMLHttpRequest in the browser and an instance of
      // http.ClientRequest in node.js
      console.log(error.request);
    } else {
      // Something happened in setting up the request that triggered an Error
      console.log('Error', error.message);
    }
    console.log(error.config);
  });

You can define a custom HTTP status code error range using the validateStatus config option.

axios.get('/user/12345', {
  validateStatus: function (status) {
    return status < 500; // Reject only if the status code is greater than or equal to 500
  }
})

Cancellation

You can cancel a request using a cancel token.

The axios cancel token API is based on the withdrawn cancelable promises proposal.

You can create a cancel token using the CancelToken.source factory as shown below:

var CancelToken = axios.CancelToken;
var source = CancelToken.source();

axios.get('/user/12345', {
  cancelToken: source.token
}).catch(function(thrown) {
  if (axios.isCancel(thrown)) {
    console.log('Request canceled', thrown.message);
  } else {
    // handle error
  }
});

// cancel the request (the message parameter is optional)
source.cancel('Operation canceled by the user.');

You can also create a cancel token by passing an executor function to the CancelToken constructor:

var CancelToken = axios.CancelToken;
var cancel;

axios.get('/user/12345', {
  cancelToken: new CancelToken(function executor(c) {
    // An executor function receives a cancel function as a parameter
    cancel = c;
  })
});

// cancel the request
cancel();

Note: you can cancel several requests with the same cancel token.

Using application/x-www-form-urlencoded format

By default, axios serializes JavaScript objects to JSON. To send data in the application/x-www-form-urlencoded format instead, you can use one of the following options.

Browser

In a browser, you can use the URLSearchParams API as follows:

var params = new URLSearchParams();
params.append('param1', 'value1');
params.append('param2', 'value2');
axios.post('/foo', params);

Note that URLSearchParams is not supported by all browsers, but there is a polyfill available (make sure to polyfill the global environment).

Alternatively, you can encode data using the qs library:

var qs = require('qs');
axios.post('/foo', qs.stringify({ 'bar': 123 }));

Node.js

In node.js, you can use the querystring module as follows:

var querystring = require('querystring');
axios.post('http://something.com/', querystring.stringify({ foo: 'bar' }));

You can also use the qs library.

Semver

Until axios reaches a 1.0 release, breaking changes will be released with a new minor version. For example 0.5.1, and 0.5.4 will have the same API, but 0.6.0 will have breaking changes.

Promises

axios depends on a native ES6 Promise implementation to be supported. If your environment doesn’t support ES6 Promises, you can polyfill.

TypeScript

axios includes TypeScript definitions.

import axios from 'axios';
axios.get('/user?ID=12345');

 

Source Viva: https://github.com/mzabriskie/axios

RELATED ARTICLES

Most Popular